Do you have a question about the Creo iqsmar series and is the answer not in the manual?
Defines environmental, electrical, and physical requirements for scanner setup.
Details warning icons and their meanings for user safety during operation.
Step-by-step guide on how to open the scanner package and identify contents.
Instructions on how to unlock shipping screws and remove protective packaging.
Detailed steps for installing the FireWire adaptor into a PC computer.
Explains how to connect the power cable and turn on the scanner.
Describes the sequence of LED lights during the scanner's startup process.
Guides through the process of installing iQsmart software on Macintosh systems.
Guides through the process of installing iQsmart software on Windows systems.
Covers initial setup tasks for the scanner connection and placement.
Explains the procedure for physically connecting the scanner to the computer.
Steps to verify the FireWire connection between the PC and the scanner.
How to start the main installation program for the scanner.
Instructions for cleaning scanner glass and placing the calibration slide.
Provides solutions for common issues encountered during installation.
Utility to check scanner modules and optics for operational problems.
Utility used for creating or recreating scanner calibration tables.
Procedure for replacing the transparency and reflective lamp units.
Guide for periodic cleaning of the scanner's upper and base glass plates.
Troubleshooting issues related to scanner power and LED indicators.
Resolving issues with scanner-computer communication via FireWire.
Addresses problems related to the quality of scanned images.
Instructions for securely packing the scanner for transportation.
Information on accessing the scanner's documentation on the CD for Mac.
Information on accessing the scanner's documentation on the CD for PC.
Step-by-step instructions for safely removing the scanner's electronic box.
Step-by-step instructions for installing the scanner's electronic box.