To Next PageTo Next PageWhat to do if Cres Cor H138NPS1813CLA Commercial Food Equipment gets too hot?
If your Cres Cor Commercial Food Equipment unit gets too hot or won't shut off, the cause may be defective electrical parts. Immediately unplug the unit.
Why my Cres Cor H138NPS1813CLA does not heat?
If your Cres Cor Commercial Food Equipment unit does not heat, it might be due to the thermostat being set too low or turned "OFF", or the switch being in the "OFF" position.
Why Cres Cor H138NPS1813CLA Commercial Food Equipment blower does not work?
If the blower in your Cres Cor Commercial Food Equipment does not work or makes noise, it could be due to a defective blower.
Details electrical parameters for hot cabinet models, including voltage, wattage, and amperage.
Instructions for properly placing and connecting the holding cabinet to a power source.
Steps for starting and operating the hot cabinet, including thermostat settings and preheating.
Procedure for safely turning off the hot cabinet, noting the indicator light behavior.
Critical safety warnings regarding electrical shock and fire hazards, advising against user service.
Guidelines for cleaning the cabinet, including recommended cleaners, methods, and general tips.
Identifies common failures, their possible causes, and recommended actions for diagnosing unit problems.
A comprehensive list of available replacement parts with their corresponding part numbers for service needs.
Illustrates electrical connections and components of the full-height pass-thru units for service reference.
General| Model | H138NPS1813CLA |
|---|---|
| Category | Commercial Food Equipment |
| Construction | Stainless Steel |
| Power Source | Electric |
| Voltage | 120V |
| Certifications | UL, cUL, NSF |
