Crescent classic User Manual

Assembly of softparts
• Attach the softparts from top to bottom, over the backrest, en-
sure that it is all the way down to seat bottom. Lock the softparts
in location with intended buttons.
• Always check that the backrest is in locked position before use.
• Lock the fabrics around the armrests by pairing the intended
buttons.
Assembly of arc
• Attach fabrics around the arc and lock it with intended zipper.
• Attach the fabric band around the arc and lock it in position with
the paired buttons.
• Attach the arc on both sides of the babystroller as shown on
picture.
Assembly of canopy
• Place canopy over the babystroller as shown on picture and at-
tach it in the holders on each side.
• Securely lock the back of the canopy to the backrest with the
intended button.
Assembly of carrycot
• Adjust backrest to lying down position and place the carrycot
inside the babystroller
• Securely lock the carrycot with the safetybands to the chassi as
shown on picture.
• Check that the carrycot is mounted correctly before use.
Assembly instructions
Folding the stroller
• To make the babystroller as small as possible, please dismount
the canopy from chassi.
• Lock both brakes and stand behind the babystroller.
• Pull lock-mechanisms simultainiously on both sides towards you,
as shown on picture.
• Release safety lock on right side of chassi by pushing the pedal
with the foot downwards.
• Lock chassi in folded position with the intended safetyjumper
attached to the side of the chassi.
Adjustment of footrest
• Push the adjustment buttons on each side of the footrest and
adjust it to desired position.
• Please make sure that the footrest is securely locked in any of
the positions before using the babystroller.
• Never let children climb or stand on the footrest.
Adjustment of canopy
• Adjust the canopy to desired position by gently holding it in the
forefront and pushing it back or forth.
Adjustment of reversible handle
• Choose travel direction with a simple handmovement by pulling
both lock-mechanisms on each side as shown on picture. Thereby
move the handle to the desired direction.
• Check that the handle securely ”clicks” on both sides before
using the babystroller.
Use

Crescent classic Specifications

General

Brand	Crescent
Model	classic
Category	Stroller
Language	English