Crescent Nordic XT User Manual

1. Chassis
Out of the box the Comfort is fully assemb-
led and ready for use except wheels, seatu-
nit and canopy.
2. To unfold
To open the Comfort chassis stand behind
the pushchair and, with both hands on the
pushbar, pull-up until the chassis clicks into
place.
3. Attach the wheels
Open the wheel lock by pressing. Place the
wheel into the axle. Release locking catch
when fully inserted and wheel should lock
into position. Pull on wheel to ensure that it
is securely tted. This process is repeated
all around.
4. Attaching the seat unit or carrycot
Engage the brake and place the seat unit
or carrycot over the chassis. When the seat
unit or carrycot is correctly tted a click will
be heard on each side. Ensure that it is se-
curely attached before use.
4b. Detaching seat unit or carrycot
Press the release buttons on both sides
and lift straight up. Marked by arrow.
5. Attaching the canopy
Fit the canopy by linserting the canopy hol-
ders in the holes on both sides.
6. Adjusting the backrest
Use the handle on the rear of the backrest
to adjust the backrest to desired position.
32
4
1
5 6
1. Chassis
Out of the box the nordic xt is fully assemb-
led and ready for use except the wheels and
canopy.
2. Attach rear wheels
Place the wheel into the axle. Release lock-
ing catch when fully inserted and wheel
should lock into position. Pull on wheel to
ensure that it is securely tted. This process
is repeated for the other side.
3. Attach front wheels
Position the wheel axle into its intended hole.
The wheel is correctly locked in place when a
click sound is heard.
4. To unfold
To open the nordic xt chassi stand behind
the pushchair and, with both hands on the
pushbar, pull-up until the chassi clicks into
place
5. Attaching the canopy
Fit the canopy by locating onto the chassi
frame. Canopy frame into the holder and
the strap securing its location
6. Adjusting the backrest
Use the handle on the rear of the backrest
to adjust the backrest to desired position.
1. Chassis
Out of the box the Compact 360 is fully as-
sembled and ready for use except the whe-
els and canopy.
2. Attach rear wheels
Place the wheel into the axle. Release lock-
ing catch when fully inserted and wheel
should lock into position. Pull on wheel to
ensure that it is securely tted. This process
is repeated for the other side.
3. Attach front wheels
Position the wheel axle into its intended
hole. The wheel is correctly locked in place
when a click sound is heard.
4. To unfold
To open the Compact 360 chassi stand be-
hind the pushchair and, with both hands on
the pushbar, pull-up until the chassi clicks
into place
5. Attaching the canopy
Fit the canopy by locating onto the chassi
frame ensuring it latches around the tube
with all four holders, resting on the canopy
holders
6. Adjusting the backrest
Use the handle on the rear of the backrest
to adjust the backrest to desired position.
1 2
4 5
3
6

Crescent Nordic XT Specifications

General

Brand	Crescent
Model	Nordic XT
Category	Stroller
Language	English