Crescent Nordic XT User Manual

7. Adjusting the footrest
In order to adjust the footrest please push
the buttons on the side while moving the
footrest to desired position.
8. Canopy adjustment
To adjust the canopy to desired position
simply grab on to the canopy top and pull or
push until desired position.
9. Handle height adjustment
There are multiple handle height positions.
To adjust, press the centre button on both
sides and simultaneously and adjust to de-
sired level.
10. Using the brakes
To apply brake, press down gently on the
middle of the brake bar. To release brake,
place foot under brake bar and pull up.
Warning always apply the brakes when the
pushchair is stationary and when placing or
removing the child.
11. Folding the chassis
Pull the folding handles on both sides (A)
whilst folding the backrest/chassi forward to
initiate the folding sequence (B)
Lift the safety latch on the right side to com-
plete the folding process (C)
12. 5-point safety harness
Feed the buckle tongues 1 & 2 into the buck-
le housing 3 and click together. Adjust your
ve-point harness at the points indicated. To
unfasten the harness squeeze in the buckle
tongues 1 & 2 and pull out of the buckle hou-
sing 3. D-Rings are provided for attaching an
extra harness complying to BS 6684.
Warning. To avoid serious injury, always use
the 5-point safety harness.
The restraint system shall not be removed.
1
2
3
A
B
A
B
C
7
A
B
8 9
10 11 12
7. Adjusting the footrest
In order to adjust the footrest a push/pull
technique must be applied. Push the footrest
inwards to make it adjustable. When the
desired position is reached pull outwards until
it locks into position.
8. Canopy locking
To lock the canopy in fully unfolded position,
use your hand to drag it out to position.
A click should be felt when the canopy is fully
unfolded and locked in position.
The canopy can also be extended by
unzipping the zipper.
9. Swivel lock/release
To change the front wheels from xated or
swiveled function adjust the button left or
right.
10. Handle height adjustment
There are multiple handle height positions.
To adjust, press the centre button on both
sides and simultaneously and adjust to
desired level. Release button and engage
at the desired height.
11. Using the brakes
To apply brake, press down gently on
the middle of the brake bar. To release
brake, place foot under brake bar and pull
upwards. Warning always apply the brakes
when the pushchair is stationary and
placing or removing the child.
Warning Always keep the barking brake
engaged when placing and removing the
child.
7. Adjusting the footrest
In order to adjust the footrest a push/pull
technique must be applied. Push the footrest
inwards to make it adjustable. When the de-
sired position is reached pull outwards until
it locks into position.
8. Canopy locking
To lock the canopy in fully unfolded position,
use your hand to drag it out to position. A
click should be felt when the canopy is fully
unfolded and locked in position. Someti-
mes a small force/handpress from above is
needed to reach the locking position.
9. Swivel lock/release
To change the front wheels from xated or
swiveled function adjust the button left or
right.
10. Handle height adjustment
There are multiple handle height positions.
To adjust, press the centre button on both
sides and simultaneously and adjust to desi-
red level. Release button and engage at the
desired height.
11. Using the brakes
To apply brake, press down gently on the
middle of the brake bar. To release brake,
place foot under brake bar and pull upwards.
Warning always apply the brakes when the
pushchair is stationary and placing or remo-
ving the child.
7
A
B
8 9
10 11
A
B
12
A
B
C

Crescent Nordic XT Specifications

General

Brand	Crescent
Model	Nordic XT
Category	Stroller
Language	English