Cressi-sub AC10 - Page 8

1st sta
g
e AC101st sta
g
e AC10
Regulators repair and maintenanceRegulators repair and maintenance
gg
•• Yearl
y
maintenanceYearl
y
maintenance
yy
• Grease all new OR with a thin silicone film: this will reduce to the
minimum the risk of damage during the assembly phases
minimum the risk of damage during the assembly phases
.
• You may grease the first two turns of the metal threads.
• All operations described in this manual are relating and destined
only
to disassembling maintenance and assembly of equipments to
only
to disassembling
,
maintenance and assembly of equipments to
be used with air (21% oxygen, 79% nitrogen)
••
Use original CressiUse original Cressi
--
sub spare partssub spare parts
JanuarJanuar 20072007 Rev. AC10 / 2 Ed. B / 07Rev. AC10 / 2 Ed. B / 07 88
••
Use
original
CressiUse
original
Cressi
--
sub
spare
partssub
spare
parts