Cressi-sub AC10 - Disassembling the 1 st Stage Regulator

1st 1st stagestage AC10: AC10:
disassemblingdisassembling
phasesphases
Regulators repair and maintenanceRegulators repair and maintenance
disassemblingdisassembling
phasesphases
•
Remove and replace all O
-
rings;
•
Remove and replace all O
rings;
• Use a plastic tool or a round pointed metal one in order not to damage the
O-ring seat;
•
To replace the O
-
ring correctly, press its sides to create a bulge inside which
To replace the O
ring correctly, press its sides to create a bulge inside which
to insert the round pointed tool, as shown in the pictures;
• Attention: USE ONLY ORIGINAL CRESSI-SUB SPARE PARTS
JanuarJanuar 20072007 Rev. AC10 / 2 Ed. B / 07Rev. AC10 / 2 Ed. B / 07 99