Cressi-sub MC5 - Page 21

January
January
2008
2008
Rev. MC5 / 1
Rev. MC5 / 1
Ed. A / 08
Ed. A / 08
21
21
Regulators repair and maintenance
Regulators repair and maintenance
1
1
st
st
stage MC5: assembling
stage MC5: assembling
phases INT
phases INT
-
-
DIN
DIN
•Place the piston
spring on the
balancing
chamber and the
HP piston in the
same, as shown
in the picture.
•Note: Be sure
the hole through
the HP piston leg
IS NOT blocked
by any foreign
body.
7K = HZ 800057
9 = HZ 800085