Cressi-sub ELLIPSE - User Manual

Regulators repair and maintenance
January 2008 Rev. ELL. OCTO /A Ed. B / 09 1
2nd stage ELLIPSE Black

Cressi-sub ELLIPSE Specifications

General

Brand	Cressi-sub
Model	ELLIPSE
Category	Controller
Language	English

Summary

Disassembly Procedures

Low-Pressure Hose Disassembly

Steps for disconnecting the low-pressure hose from the regulator assembly.

Cam-Lock Disassembly

Procedure for removing the cam-lock mechanism from the regulator.

2 nd Stage Mechanism Removal

Steps to safely remove the main 2nd stage mechanism from the regulator body.

Flux Diverter Disassembly

Instructions for removing the seal ring of the flux diverter.

Assembly Procedures

2 nd Stage Mechanism Reassembly

Guidance on reassembling the internal components of the 2nd stage regulator.

Mechanism Assembly in Body

Steps for inserting the assembled 2nd stage mechanism into the regulator's case.

Setting and Adjustment Procedures

Setting Cap Adjustment

How to unscrew and adjust the second stage setting cap using an Allen wrench.

Valve Nozzle Setting

Procedure for setting the valve nozzle depth using a setting gauge.

Lever Height Adjustment

Adjusting the height of the valve lever for optimal regulator performance.

Final Checks and Service Records

Final Regulator Checking

Steps to verify the regulator's functionality and check for leaks after assembly.

Service Record Management

Forms for documenting maintenance history, technician details, and future service.