Cressi Archimede II

To Next Page

To Previous Page

182

2 dive time, shown by the “DIVE T" icon, given by the timer

in minutes and seconds.

3 maximum depth reached during the dive

given in meters (m) or feet (ft.), shown by the

“MAX” icon.

4 segmented ascent rate indicator

5 icon of maximum depth alarm (if ON – please see 2.5.1)

6 computing program icon

Additional important information may be obtained by depres-

sing button A ( ) depressed during the dive, representing (pic-

ture 23):

1 Maximum depth reached during the dive, given in meters

(m) or feet (ft.);

2 Current temperature, expressed in °C or °F ;

by keeping button B depressed it is possible to read the

time in hours and minutes. The UFDS display will show

( ) (picture 24).

WARNING: The computer will not compute any saturation

and de-saturation computation during the remaining 48

hours elapsing from the end of the program dive.

 DANGER: Should you decide to reset the instrument by

pressing button RESET on the computer’s back, the nitro-

gen memory will be cancelled. Therefore, the instrument will

not be able to compute a following dive. Never use this

function at least 48 hours after the last diving activity.

Cressi Archimede II - Page 25