Need help?Do you have a question about the Cressi NEPTO and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Battery Type | CR2450 |
| Connectivity | No |
| Modes | Air, Nitrox, Gauge |
| Nitrox Compatibility | Yes |
| Algorithm | RGBM |
| Type | Dive computer |
| Battery | User Replaceable |
| Depth Rating | 150 meters |
| Logbook Capacity | 50 dives |
| Interface | Button controls |
| Max Depth | 150 meters |
| Water Resistance | 150 meters |
Details proprietary algorithm, alarms, and settings for freediving.
Emphasizes medical checks, self-assessment, and risk factors for diving.
Covers training, computer limitations, dangers, and medical conditions for freediving.
Explains the UP/SEL and DOWN/ESC button operations for navigation and control.
Allows choosing between FREE mode for freediving or OFF mode to disable the pressure sensor.
Allows setting Taravana protection levels (L1-L8) for dive safety.
Covers setting surface time, depth, dive time, and interval alarms.
Explains Taravana phenomenon, its causes, and prevention methods.
Details the dive time to recovery time ratio settings and warnings.
Guides on setting five independent depth alarms (AL1-AL5) from 10m to 120m.
Enables alerts for exceeding depth intervals, settable from 2m to 25m.
Details connecting to a computer via USB for data transfer and software installation.
Explains connecting to mobile devices via Bluetooth for data transfer.
Displays current dive data like max depth, speed, dive time, and temperature.
Explains the low battery symbol and when to replace the battery.
Details the steps for replacing the battery, including warnings and notes.
Outlines the warranty period for dive computers and accessories.
To Next Page
