Cressi NEPTO - Time Set (Time-S) Correcting the Time and Date; Setting Time and Date

ENGLISH
23
TIME SET (TIME-S) correcting the time and date
From this screen, press
SEL
to access the function for
correcting the time, date, alarm clock, and a second time zone if used.
Press UP / DOWN to scroll through the following screens:
AL. ON/OFF (daily alarm clock) - H24/H12 - hour - minutes - d-m/m-d (day-
month or month-day display) - day - month - year T2 (second time one) ON/OFF.
Alarm clock setting:
From the AL. OFF screen, press
SEL
.
OFF will flash on the display.
Press UP /DOWN to switch it ON, and then
SEL
to confirm.
Press UP /DOWN to move to the hours or minutes. The unit selected will
flash.
Press
SEL
, and then UP /DOWN to change the parameter.
To confirm, press and hold
SEL
until you hear the confirmation beep.
Press
ESC
to exit the function.
Date/time setting
From the AL.OFF screen, press UP / DOWN until the unit you want to
change begins to flash.
Press
SEL
to view the individual unit, and then use the UP / DOWN buttons
to change the value.
Press
SEL
to confirm.
Press
ESC
to exit the function.
Setting the second W (world) time
From the T2 screen, press
SEL
.
OFF will flash on the display.
Press UP / DOWN to increase or decrease the time zone in increments of
30 minutes.
Press
SEL
to confirm, and then
ESC
to exit the function.