Need help?Do you have a question about the Cressi GIOTTO and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Dive Modes | Air, Nitrox, Gauge |
| Battery Type | CR2430 |
| Depth Rating | 120 meters |
| Algorithm | CRESSI RGBM |
| Backlight | Yes |
| Ascent Rate Indicator | Yes |
| Audible Alarms | Yes |
| Altitude Adjustable | Yes |
| Safety Stop | Yes |
| PC Interface | Optional |
| Nitrox Compatibility | Yes (21-50%) |
| Logbook Memory | 70 hours or 60 dives |
Addresses DCS risks, influencing factors, and the need for medical checks.
Covers safety for high altitude diving and the importance of Nitrox training and mixture checks.
Explains how to select AIR or NITROX mode for the upcoming dive.
How to set PO2 for Mix1 and Mix2, including safety limits and factory defaults.
Procedure for setting the oxygen percentage for the first Nitrox mixture (MIX1).
Procedure for setting the oxygen percentage for the second Nitrox mixture (MIX2).
Explains how to set the Safety Factor (SF0, SF1, SF2) for increased safety.
How to set the altitude level for accurate dive calculations.
Details on diving with Nitrox, including mixture verification and risks.
Explains the CNS toxicity graph and warning indicators for oxygen exposure.
Information provided when no-decompression limits are exceeded, including deco stops.
Details the alarm for surfacing before completing a decompression stage.
To Next Page
