Need help?Do you have a question about the Cressi CARTESIO GOA and is the answer not in the manual?
General| Modes | Air, Nitrox, Gauge, Free Dive |
|---|---|
| Gauge Mode | Yes |
| Free Dive Mode | Yes |
| Logbook | Yes |
| Battery Type | CR2450 |
| Backlight | Yes |
| Algorithm | Cressi RGBM |
| Altitude Adjustable | Yes |
| Type | Dive Computer |
| Nitrox | Yes |
| Safety Stop | Yes |
| Ascent Rate Indicator | Yes |
| Audible Alarms | Yes |
| Battery | User replaceable |
| Max Depth | 120 meters |
| Display | High-contrast display with large digits |
Basic timekeeping features like 12/24 hr format, calendar, stopwatch, alarm clock.
Details CRESSI RGBM algorithm, tissue models, dive programs, Nitrox capabilities.
Crucial safety information and instructions to read before use.
General risks of DCS, factors increasing risk, and personal responsibility.
Dangers of high altitude diving and advice before flying.
Instrument for personal use; requires training. Check Nitrox mix.
Advises against Nitrox without specific course due to severe risks.
PO2 parameter setting and crucial safety for free diving.
Pre-dive checks, battery, and risks of deep free diving.
Shows time/date, surf/desat/no-fly times, and world time function.
Explains scrolling through main menu screens using buttons.
Details how to use the stopwatch, start, stop, reset.
Explains selecting dive modes (AIR, EAN, FREE, GAGE, OFF).
Describes data shown in the AIR dive log.
Details data shown in the EAN log for GOA model.
Details data shown in the EAN log for CARTESIO model.
Shows total session time, max depth, dip number, temperature.
Details how to view data for individual dips within a free dive session.
Describes the data displayed in the GAGE dive log.
Explains how to access and set dive parameters.
How to turn Deep Stop ON/OFF and set Safety Factor.
Setting altitude level and PO2 for safety.
How to set the oxygen percentage for Nitrox dives.
How to set alarms for Free Diving mode.
Details setting Surface time, Depth, Depth Interval, Dive Time alarms.
How to adjust time, date, alarm clock, and set a second time zone.
How to view non-decompression times at various depths.
Accessing PC Link, History, and System Information.
How to disable the fast ascent audible alarm.
How to perform tissue erase and reset the instrument.
Describes the pre-dive screen and importance of setting parameters.
Explains the different dive modes: AIR, NITROX, FREE, GAGE.
Details information displayed during an Air dive within the safety curve.
Explains Nitrox mode, risks, and data displayed during Nitrox dives.
Details gas switching during a dive with CARTESIO for Nitrox mixes.
Explains the PO2 alarm and depth indication when limit is reached.
Illustrates CNS toxicity levels and associated alarms.
Shows how ascent rate is displayed and the SLOW indication.
Explains the recommended safety stop and its display.
Warnings for NO DECO time drop and Deep Stop suggestion.
Information on handling dives that exceed safety limits.
Describes the alarm and consequences of skipping a decompression stop.
Details functions for free divers: dip count, recovery times, display info.
Shows data displayed during surface interval between free dives.
Explains the GAGE mode for depth, timer, and basic dive parameters.
How to activate and use the depth stopwatch in GAGE mode.
How to use the backlighting function for better visibility.
Information shown after AIR/NITROX dives during surface interval.
Explains NO FLY time and rules for subsequent dives.
Connecting to PC and general care instructions.
Details when and how to change the battery, with warnings.
Lists algorithm, sensor range, thermometer, watch, battery specs.
Outlines the warranty terms, coverage, and purchase country validity.
Defines warranty duration for computers and accessories.
How to submit a claim and contact dealers.
Lists items not covered by the limited warranty.
Details Cressi's liability limitations and exclusions.
To Next Page
