16
English
TIME SET (TIME-S) changing time and date
From this screen, pressing the
SEL
button gives access to the time and date
adjustment, alarm clock, second time zone functions.
By pressing the UP / DOWN buttons you can scroll through the following scre-
ens: AL. ON/OFF (daily alarm clock) - H24/H12 - time - minutes - d-m/m-d (day-
month or month-day options) - day - month - year T2 (second time zone) ON/OFF.
Setting the alarm clock:
From the AL. OFF screen, press the
SEL
button.
The display will show the indication OFF, ashing.
Press up /down to change to ON and press the
SEL
button to confirm
your choice.
Press up /down to move to the time or minutes mode, the data that flashes
is the one selected.
Press
SEL
and then UP /DOWN DOWN to change the parameter.
Press
SEL
to confirm until you hear the confirmation beep.
Press
ESC
to exit the function.
If the alarm clock is ON, the display will show the alarm clock (Bell) icon.
Setting the date/time
From the AL.OFF screen, by pressing the UP / DOWN buttons, scroll until
the data you want to change begins to flash.
Press
SEL
to view the individual data, and then press the UP / DOWN
buttons to change the value.
Press
SEL
to confirm.
Press
ESC
to exit the function.
Setting another time zone W (world)
From screen T2 press the
SEL
button.
The display will show the indication OFF, ashing.
Press UP / DOWN to change (increase/decrease) the time zone in 30
minute steps.
Press
SEL
to confirm, then press
ESC
to exit the function.
Surface time alarm (SURF-T)
When this alarm has been turned on, once the time previously set has elapsed,
the watch will give out three beeps to indicate that surface time has been excee-
ded, and the surface time shown on the display will begin to flash.
The time can be set in a 1’00” to 10’00” range, in 0’30” steps.
Press
SEL
to access the function, and use the UP / DOWN buttons to set
the desired time, press
SEL
to confirm.
Depth alarm (DEPTH)
When this alarm is ON, once the depth previously set has been exceeded, the
watch will give out three beeps to indicate that the depth level has been exceeded
and the depth shown on the display will begin to flash.
The depth can be set in a 1m. (3 ft.) to 50 m. (164 ft.) range, in 1 m (3 ft.) steps.
Press
SEL
to access the function, and use the UP / DOWN buttons to set
the depth, then press
SEL
to confirm.
DEPTH INTERVAL ALERT (STEP)
You can set an alert that will be given out whenever a depth interval is exceeded,
for instance every 2m (6 ft.).
When this alert has been turned on, whenever a depth interval is exceeded, the
watch will give out three beeps.
You can set the interval in a range from 2m (6ft.) to 25m (82ft.) in 1m. (3ft.)
steps. Press
SEL
to access the function, use the UP / DOWN buttons to set
the desired depth, then press
SEL
to confirm.
Allarme del tempo di immersione (DIVE-T)
When this alarm is ON, once the time previously set has elapsed, the watch will
give out three beeps to tell you that your dive time has been exceeded, and the
dive time indication on the display will begin to flash.
Dive time can be set in a range from 0’10” to 6’00” in steps of 0’10”.
Press
SEL
to access the function, and press the UP / DOWN buttons to set
the desired time, then press
SEL
to confirm.
Press
ESC
to exit the alarm setting mode.
To Next Page
Loading...
