ENGLISH
22
Setting the logbook sampling time (LOG.SAM)
This function is useful if you want to download your dive profile using an external
USB or Bluetooth interface.
The LOG.SAM function is used to select the profile sampling time.
Using a longer sampling time will result in a less defined graphic, but you will be
able to save more sessions.
Using a shorter sampling time will result in a better defined graphic, but fewer
sessions can be displayed.
You can set a sampling time of 2, 1, or 0.5 seconds.
If sampling every 2 seconds, up to 32 hours of diving can be saved.
If sampling every second, up to 16 hours can be saved.
If sampling every 0.5 seconds, up to 8 hours can be saved.
The hours can be split among different sessions.
People who don't use an external interface can set the sampling time
to OFF. In this case the NEPTO log will be able to show data for up to 90 freediving
sessions.
Press
SEL
to enter the function, then UP /DOWN to set the desired depth,
and finally
SEL
to confirm.
Press
ESC
to exit the function.
SEL ESC
SEL ESC
To Next Page
Loading...
