ENGLISH
16
Surface time alarm (SURF-T)
By activating this alarm, once the previously set time has elapsed, NEPTO will beep three times to alert the diver that the surface time has been exceeded and the
surface time shown on the display will begin to flash.
The setting can be based on time elapsed, from 1’00” a 10’00” in increments of 30”.
Press
SEL
to enter the function, then UP /DOWN to set the desired depth, and finally
SEL
to confirm.
Press
ESC
to exit the function.
SEL ESC
SEL ESC
To Next Page
Loading...
