Cressi NEPTO - Depth alarm (DEPTH); Setting Depth Alarms

ENGLISH
17
Depth alarm (DEPTH)
When this alarm is on, NEPTO will beep three times when the diver exceeds the previously set depth.
Cressi NEPTO features five different independent alarms: AL1, AL2, AL3, AL4, and AL5.
The depth can be set from 10 m. (33 ft.) to 120 m. (394 ft.) in increments of 2 meters (6 ft).
Press
SEL
to enter the function, then UP /DOWN to set the desired depth, and finally
SEL
to confirm.
Press
ESC
to exit the function.
SEL ESC
SEL ESC