ENGLISH
7
CHRONO
From this screen, pressing
SEL
accesses the
function. To start or stop the stopwatch, press the UP /DOWN buttons.
You can read split times by pressing DOWN while the
stopwatch is running. In this case, the time on the upper left will be replaced by
the word "LAP", and you'll be able to read the intermediate times on the center
line of the display.
SEL ESC
START / STOP
LAP / RESET
TIME HOURS
MIN. SEC.
ESC
TO RETURN
Press
ESC
to exit the LAP function.
Press the DOWN button (when the stopwatch is stopped) to reset the stopwatch.
The first line on the display will show the current time, and the stopwatch hours.
The central line shows the stopwatch minutes, seconds, and tenths of a second.
The tenths are only displayed for the first ten minutes.
The stopwatch will be reset automatically after 24 hours.
To exit this mode press
ESC
.
NOTE: If you exit the stopwatch function while it is running, the count will
continue in the background.
To Next Page
Loading...
