ENGLISH
2016/425 which sets out the conditions for bringing to market and
the minimal essential safety requirements of PPE. Consequently,
they bear the CE mark followed by the certifying agency identifi-
cation number 0474, identifying RINA, the registered testing
agency that monitors its manufacture pursuant to Form B+C2 of
the EU 2016/425 regulation, as well as the critical health and safety
requirements for category III PPE. It also regulates the conditions
for bringing such equipment to market.
2.2. - Galaxy Adjustable / Master / Master Cromo /
Galaxy, Octopus MG Balanced
disassembly and maintenance
In designing the Master regulator, quick and easy dismantling and
maintenance were taken into account, as they are indispensable
features for a regulator that is always perfectly serviced, cali-
brated and efficient.
WARNING: the dismantling, maintenance and calibration of
the 2nd stage regulators should only be carried out by author-
ized Cressi-Sub centres and the calibration values CANNOT
and MUST NOT be changed by the user, to avoid prejudicing
the safe operating of the regulator. We cannot be held in any
way liable for any intervention carried out by technicians that
have not been authorised by Cressi-Sub.
You can open and dismantle the second-stage regulator by
using the Allen key provided, in order to dismantle the first stage
HP and LP plugs, directly accessing its internal mechanics. This
extraordinary feature, which is patented and found nowhere
else on the market, makes it very easy to open and clean the
casing, as well as check the smooth-functioning of each and
every component.
Indeed, the cap and central chamber of the exhaust are mechan-
ically connected thanks to the innovative patented “cam-lock”
system that enables an ultra-fast “hinged” opening and closing of
the case, which simultaneously blocks the cap and the di-
aphragm with extreme efficiency and precision.
Opening and closing your regulator has never been as safe and
easy!
In keeping with our objective of quick and easy control mainte-
nance and tuning operations, the mechanics of Cressi-Sub sec-
ond-stage regulators have been designed so as to be instantly
removable, without risking altering the level of calibration. Disman-
tling and replacing worn components whenever maintenance in-
terventions are required can be carried out with the whole
mechanics system having been removed from the casing, mak-
ing it much easier to complete operations.
Logon to our website: www.cressi.com for further important in-
formation about our products and equipment.
65
SECOND STAGES
To Next Page
Loading...
Need help?
General