Crest Audio Century Series - Wiring Conventions

VX
PAGE 5
CENTURY SERIES
Wiring Conventions
Crest consoles are wired with connectors that are used throughout the professional audio industry.
Wiring is as follows:
1
2
3
PIN 1 = GROUND
PIN 2 = POSITIVE
PIN 3 = NEGATIVE
OUTPUT XLR
INPUT XLR
PIN 3
PIN 1
PIN 2
PIN 3
PIN 2
PIN 1
TIP - POSITIVE
RING - NEGATIVE
SLEEVE - GROUND
INPUT
TIP - LEFT
RING - RIGHT
SLEEVE - COMMON
Headphone
Connections: Bal Input, Bal Output,
Direct Out, Insert Send, Bal Insert
Return, Tape In
Connector: Headphone Output
Standard TRS
(Tip - Ring - Sleeve)
1/4" Plug
Standard TRS
(Tip - Ring - Sleeve)
1/4" Plug
TIP - SEND
RING - RETURN
SLEEVE - GROUND
INSERT
Connector: Stereo Input Module Insert L, Insert R
Standard TRS
(Tip - Ring - Sleeve)
1/4" Plug