Crest Audio X-Eight HS - Insert Points-Left, Right, and Mono; Insert Sends-Left, Right, and Mono; Insert Returns-Left, Right, and Mono; MIDI In, MIDI out

p.99
master HS module
rear panel features
insert points—left,right,and mono
Separate
1/4" TRS jacks provide the ability to insert external signal proces-
sor into the signal paths of the left,right and mono
MASTERS.
insert sends—left,right,and mono
These jacks connect to the input of signal processors.The sig-
nals are ground compensated.
insert returns—left,right,and mono
These jacks connect to the outputs of a signal processors.They
can accept balanced or unbalanced signals.
Midi In,Midi Out
These jacks allow the MICROPROCESSOR MUTE SYSTEM to be linked into a MIDI
system.Program changes and certain system-exclusive tasks can be carried
out.
see—microprocessor mute system
midi-in
M
IDI information is brought into the console and routed to the MICRO-
PROCESSOR MUTE SYSTEM.
midi-out
M
IDI information sent out by the MICROPROCESSOR MUTE SYSTEM is available
at this connector.
DC
power-in
This jack connects the power supply cable to the console.
5
Plugging a 1/4" plug
into this jack does not
break the internal signal
flow of the respective left,
right, and mono masters.
+
Plugging a 1/4" plug
into this jack breaks
the signal flow
of the respective left, right,
and mono masters.
+