Crestron Electronics 4 Series - Status

Product Manual — Doc. 8559B 4-Series™ Control Systems • 111
Status
Select the Status tab on the top left of the configuration interface to display selections for
viewing the status of device, network, and USB, and .AVFramework™ software settings.
Select on a selection name to expand the selection. If the selection is expanded, select the
selection name again to collapse the section.
Status Tab Selections
Device
Select Device to view general device information.
Status Tab - Device
The following Device information is displayed:
l
Model: The control system model name
l
Serial Number: The control system serial number
l
Firmware Version: The firmware version loaded onto the control system
Select + More details at the bottom of the Device tab to display an expanded section that shows
more control system information. If + More Details is selected, select - Less Details to collapse
the section.
Network
Select Network to view the status of the network settings for the control system.