Crestron WPR-48 - User Manual

28 pages

Save Page as PDF

Questions and Answers

M
Mark WilliamsAug 10, 2025
What to do if my Crestron WPR-48 has no response from Cresnet system?
- A
  Alexander AcevedoAug 10, 2025
  If your Crestron Universal Remote isn't responding to the Cresnet system, consider these potential causes and solutions: * Check that the Net ID for the gateway matches the Net ID set in the SIMPL program. * Confirm that the RF ID for the gateway matches the RF ID set in the SIMPL program. * Ensure the correct program is loaded in the system. * Verify the gateway has power. * If multiple transmitters are available, confirm the correct unit is being used. * Use Viewport to verify the WPR-48 attributes.
R
rossstevenAug 21, 2025
Why is my Crestron WPR-48 having intermittent response during RF transmission?
- P
  Penny SteeleAug 21, 2025
  If you're experiencing intermittent response during RF transmission with your Crestron Universal Remote, it could be due to a low battery charge. Place the unit in the docking station to recharge the battery. Also, verify that a large amount of metal is not blocking the transmission, as the RF gateway might be near a large metal structure.
C
Cory FosterAug 31, 2025
How to fix Crestron Universal Remote when LEDs do not illuminate?
- K
  Kathleen SotoAug 31, 2025
  If the LEDs on your Crestron Universal Remote do not illuminate, it is likely that the battery is discharged. To resolve this, place the unit in the docking station to recharge the battery.

Crestron WPR-48 Specifications

General

Brand	Crestron
Model	WPR-48
Category	Universal Remote
Language	English