Use and Maintenance instructions
Submersible horizontal mixers
“ TBM “ series
Release 03 / 2014
8
5. PRODUCT DESCRIPTION AND USE
5.1. Sectors for use
Mixers manufactured by Cri-Man S.r.l. are ideally suited to applications involving the mixing, i.e. the
homogenizing and suspending of liquids of low to medium viscosity.
Please contact Cri-Man S.r.l. for further information on other applications, such as the mixing of viscous
media or explosive materials.
5.2. Reception and nameplate exemplification
In the event of damage, please contact the nearest service center or the manufacturer.
Check that the received material correspond to what indicated in transport document and that it is not
damaged.
WARNING This machine may not be operated under conditions which exceed either the threshold
values stated on the factory specification plate, or any other instruction
s contained in the operating
regulations or the contractual documentation. All prescribed electrical connection figures, as well as all
installation and servicing instructions, must be adhered to without exception. Any use of the machine
which exceeds the conditions contained in the operating manual can result in the failure of the machine.
Non-compliance with this warning can result in personal injury and material damage.
Note :
All descriptions and instructions in this guide are based on standard models. These operating
regulations do not take into account all details and variations in design and construction nor any
possible eventualities or events that may occur during erection, operation or servicing.
These operating regulations do not take any local safety regulations into account. The operator of this
installation is responsible for ensuring that such regulations are adhered to and that they are followed by
the installation personnel who install the mixer.
The type plate on the casing identifies the type of mixer, the most important operating data and the
machine number or serial number respectively. These details must always be given when information is
required, when reordering machines or spare parts.
In the event of damage, please contact the nearest service center or the manufacturer.
The factory plate on the casing identifies the type of mixer, the most important operating data and the
machine number or serial number respectively. These details must always be given when information is
required, when ordering machines or spare parts.
To Next Page
Loading...
General