Criterion CIR30B1S - Replacing Oven Light

37
Replacing Oven Light
The oven light is a standard 25 watt (G9) appliance bulb.
Before replacing the bulb, make sure the oven is cool and the controls are
turned o.
1. Disconnect power at the main power supply (fuse or breaker box).
2. Remove the bulb cover by pulling it out of the opening.
3. Remove the burned out bulb from the socket.
Note: To avoid damage or decreasing the life of the new bulb, do not touch bulb with bare ngers.
Wear cotton gloves or use a tissue when replacing the light bulb.
4. Replace the bulb, and then replace the bulb cover.
5. Reconnect power at the main power supply (fuse or breaker box).
! IMPORTANT !
Electrical Shock Hazard
· Make sure the oven and lights are cool and power to the oven
has been turned o before replacing the light bulb(s).
· The lenses must be in place when using the oven. The lenses serve
to protect the light bulb from breaking.
· The lenses are made of glass. Handle carefully to avoid breakage.
· Failure to do so could result in death, electric shock, cuts or burns.