Wearing the chest belt
Adjust the chest belt so that it fits snugly directly below the chest
muscles. Moisten the contact areas with water or ECG gel (ECG gel
can be purchased at a pharmacy). Ensure that the contact areas
constantly remain in skin contact.
Position the chest belt as per the following illustration.
Please ensure that the chest belt is seated properly. When you have
exhaled completely the chest belt should still have very slight tension
pressing it to your chest.
High voltage power lines, Trains or moving vehicular traffic may
interfere with the heart rate measurement. Please consider this when
planning your exercise route.
contact area contact area
To Next Page
Loading...
