EasyManua.ls Logo

Crivit SP-107 - Childrens Bicycle Helmet SP-107 Safety Information

Crivit SP-107
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 5
Children's bicycle helmet SP-107 / LED-rear light SP-09
GB IE
GB IE
Children's bicycle helmet SP-107 / LED-rear light SP-09
CHILDREN'S BICYCLE HELMET SP-107
Dear Customer!
We are pleased that you have decided to purchase one of our high-quality products, which
are manufactured and certied in strict adherence to the currently valid safety standards.
Familiarize yourself with this product before rst use. Carefully read the operating instructions
and the safety information. Use the product only as described and for the indicated
purposes. Keep these instructions. If you give the product to a third party, be sure to include
all the documents with it.
Safety information
Warning! This helmet should not be used by children while climbing or doing other
activities when there is a risk of strangulation/hanging if the child gets trapped with
the helmet.
• Your helmet was specially designed for protection during cycling
, skateboarding ,
roller-skating
and riding a scooter . It must not be used for other types of sport or for
motorcycling
. This helmet is not suitable for downhill riding.
• Please note that the helmet can only provide protection if it ts correctly. Please ensure you
try out a range of different sizes before buying.
• Please be aware that despite correct adjustment your helmet cannot always protect you
from all injuries.
• The helmet should be checked for visible deciencies at regular intervals.
• The helmet needs to be replaced after any hard impact, blow or deep scratch, as it
thereby loses its protective function.
• The helmet must also be replaced when it no longer ts properly or no later than 5 years
after the date of manufacture, even if no damage can be detected.
• Any adjustment to or removal of the original parts of the helmet can extremely impair its
protective function. The helmet may not be altered in order to make additions in a way
not recommended by the manufacturer.
High temperatures, from as low as 60° C, can seriously damage the helmet. Uneven
helmet surfaces and the formation of small blisters are signs of such damage. Do not
store behind panes of glass, e.g. in the car or close to sources of heat or warmth.
The helmet has reective details for higher visibility in road trafc.

Related product manuals