Need help?Do you have a question about the Crivit SP - 33 and is the answer not in the manual?
General| Wireless | No |
|---|---|
| Pressure Gauge | Yes |
| Functions | Inflation, Pressure Measurement |
| Product Type | Air Pump |
| Maximum Pressure | 150 PSI |
| Material | Plastic |
Instructions on checking, replacing, and cleaning the helmet to maintain its protective effect and avoid damage.
Guidance on ensuring the helmet is worn levelly and horizontally for optimal vision and protection.
Instructions on using the rear knob to adjust the helmet's size for a snug and comfortable fit.
Guidance on positioning the strap divider below the ear for secure and comfortable strap placement.
Details on how to properly tighten or loosen the chin strap for secure fastening during use.
Instructions on removing the visor and precautions regarding helmet pin hole wear.
Information on the intended use, limitations, and safety precautions for the LED rear light accessory.
Steps to prepare the LED rear light before its initial use, including removing safety strips.
Instructions on how to detach and reattach the LED rear light from the helmet holder.
Description of the different operating modes available for the LED rear light.
Step-by-step guide on how to replace the battery in the LED rear light unit.
Recommendations for cleaning and maintaining the housing of the LED rear light.
To Next Page
