EasyManua.ls Logo

Crivit SP-107 - LED Rear Light SP-09 User Information; Before the First Use; Removal and Attachment of the Tail Light

Crivit SP-107
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Children's bicycle helmet SP-107 / LED-rear light SP-09
GB IE
GB IE
Children's bicycle helmet SP-107 / LED-rear light SP-09
• Parents should ensure that their child also checks to make sure that the LED backlight
is working on a regular basis.
• Warning! LED rear light not suitable for children under 14 years. There
is a risk of high temperature and disassembly.
• The LED rear light is not a toy and its use by children is only permitted if they are under the
supervision of adults.
• The light source of this light cannot be replaced. Once the light source has reached the
end of its life, the whole light must be replaced.
• The changing of batteries must only be carried out by adults.
• If the battery leaks, avoid any contact with the skin as this can lead to skin irritation.
• Leaking batteries must be disposed of immediately.
• Do not short circuit batteries or take them apart. Do not make any modications to the
battery. Do not squeeze or deform the battery and do not drill into the battery.
• Do not continue to use the battery if it is damaged.
• Keep the batteries in the original packaging.
• Never try to recharge non-rechargeable batteries! There is a danger of explosion!
• Replace the battery only with the same or an equivalent type of battery.
• Keep new and used batteries away from children.
• Children can put small parts such as the button cell supplied in their mouths when
playing and choke on them. Do not let children play with small parts.
• Seek medical advice immediately if you know or suspect that a battery has been
swallowed or entered the body in any other way.
• Switch off the LED rear light after use. Remove the battery from the helmet if it will not
be used for a longer period of time. Store the battery in a cool and dry place.
• Do not bring lithium batteries with damaged casings into contact with water.
• Ingestion of button cells or batteries can cause burns, perforation of soft tissues and in
severe cases death.
User information
1. Before the rst use
Take the tail light off the helmet (Fig. J). Before the rst use, remove the safety strips from the
reverse of the LED tail light (Fig. I).
2. Removal and attachment of the tail light
• Release the LED back light from below with the help of a coin or similar (Fig. J).
• To remove the rear light, pull the rear light out of the holder (Fig. J).
• To attach it, the LED rear light must be re-plugged on the holder provided for this purpose.