English 4
Français/French 9
Deutsch/German 14
Español/Spanish 19
Português/Portuguese 24
Italiano/Italian 29
Nederlands/Dutch 34
Svenska/Swedish 39
Suomi/Finnish 43
Dansk/Danish 48
Norsk/Norwegian 53
Polski/Polish 58
Česky/Czech 63
Slovenčina/Slovakian 67
Magyar/Hungarian 72
Română/Romanian 77
български/Bulgarian 82
Hrvatski/Croatian 87
ΕΛΛΗΝΙΚΑ/Greek 91
FITTING A PLUG (UK AND IRELAND ONLY)
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be
removed and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be
refitted. The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply
cord and an appropriate plug fitted as detailed. If you remove the plug it
must not be connected to a 13 amp socket and the plug must be disposed of
immediately.
If the terminals in the plug are not marked or if you are unsure about the
installation of the plug please contact a qualified electrician.
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
3A
To Next Page
Loading...
