EasyManua.ls Logo

Cropico DO4002 - Accessories

Cropico DO4002
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
Digital Ohmmeter DO4000 Series
16
16. Accessories
Battery Charger The 4000 series milliohmmeters are able to use a rechargeable
battery pack. This includes battery cassette with rechargeable batteries, docking
station which also acts as bench stand, and charger.
Leads The 4000 series milliohmmeters may be used with a variety of lead sets.
The following are the available selection. Remember, if you do not see suitable
leads for your application; please consult our customer help desk.
Carrying Bag A carrying bag with shoulder strap and lead pouch that has a clear
front panel to enable full operation of the instrument in transit.
Wire Clamps For the precise measurement of 1 meter cable samples we offer 2
wire clamp options
17. Additional Battery Pack
The 4000 series of milliohmmeters have a removable battery cassette, which hold
5 AA cells. Whilst battery life is approximately 12 hours continuous use it is
prudent to have a spare battery pack that can be quickly and easily exchanged.
Ordering Code
HS01-P
HS02-P
LS03-P
LS04-P
LS05
LS06-P
Description
Duplex Handspikes with 2.5 metre lead length, current and potential spikes
suitable for plate or Bussbar measurements.
Duplex Handspikes as a HS01-P but with 2.5 and 15 metre lead lengths
Large Kelvin clips with 3 metre lead length suitable for attaching to rods bars
or cables up to 38mm diameter
As LS03-P but with lead lengths 3 and 15 metres
Executive lead set consisting of 4 x 1 metre leads with banana plugs, 4 x
crocodile clips 4 x test prods and 4 x Kelvin clips (KC1) jaw opening 4mm
Kelvin lead set comprising of miniature Kelvin clips (KC2) with 1 meter leads
attached terminated with banana plugs Jaw opening 6mm.
Suitable for fine wires.
Ordering Code
C01
C02
Description
1 metre wire clamp with hardwood base suitable for cable diameters up
to 25mm
1 metre wire clamp with metal base and provision for temperature sensor
suitable for wire cross section 1 to 1000mm
Ordering Code
4000-02
4000-03
Description
Replaceable Battery holder with non rechargeable batteries.
Replaceable Battery holder with rechargeable batteries

Related product manuals