The WEED-IT Quadro system is sold and supported in Australia and Canada by Croplands
Equipment Pty Ltd
50 Cavan Road,
Dry Creek
SA 5094
+61 (0)8 8359 9300
www.croplands.com.au
Last changed: April 2022
© Copyright Rometron B.V. 2022
This manual was created by Croplands and Rometron BV in The Netherlands and is subject to
copyright. No part of this publication may be multiplied, reproduced, stored and/or published, in
any way whatsoever, without the prior written consent of the publisher. For further information
please refer to:
Rometron B.V.
Hoge Wesselink 8
7221 CJ Steenderen
+31 (0)575 451111
www.weed-it.com
Patented and patents pending
All rights reserved
Disclaimer
Although all information in this manual was carefully checked and is believed to be correct, such cannot be guaranteed.
Rometron B.V. cannot be held responsible for any damage, direct or indirect, resulting from the use or misuse of the
information in this manual, or the instructions described herein. This is also true if Rometron was aware of the possibility
of such a damage. Your statutory rights are not affected.
Without prejudice.
Original instructions
Subject to change without prior notice. This WEED-IT Quadro User Manual, Version 1.0, was last updated March 2022.
2 / 122 | WEED-IT Quadro | User Manual - BT-UMWEEDQ-C