Need help?Do you have a question about the Crosley 51 and is the answer not in the manual?
Lists necessary aerial, ground, tubes, batteries, headphones, grid leak, and wire for connection.
Details the required 6-volt storage "A" battery and 45-volt dry "B" batteries for operation.
Explains the importance of good headphones and the optional use of a grid leak for better results.
Provides instructions for wiring aerial, ground, and batteries to the receiver set.
Explains how to use a "C" battery for increased amplifier efficiency with higher "B" voltages.
Guides on connecting dry cells for "A" and "B" batteries for WD12/C12 tubes.
Instructions for using adapters for UV199/C299 tubes and connecting dry cell batteries in series.
Refers to previous instructions for "C" battery usage with UV199/C299 tubes.
Guides on turning on the set, tuning stations using rheostat and condenser dials.
Discusses expected signal reception range and what to do if the set doesn't work.
Lists necessary aerial, ground, tubes, batteries, headphones, grid leak, and wire for connection.
Details the required 6-volt storage "A" battery and 45-volt dry "B" batteries for operation.
Explains the importance of good headphones and the optional use of a grid leak for better results.
Provides instructions for wiring aerial, ground, and batteries to the receiver set.
Explains how to use a "C" battery for increased amplifier efficiency with higher "B" voltages.
Guides on connecting dry cells for "A" and "B" batteries for WD12/C12 tubes.
Instructions for using adapters for UV199/C299 tubes and connecting dry cell batteries in series.
Refers to previous instructions for "C" battery usage with UV199/C299 tubes.
Guides on turning on the set, tuning stations using rheostat and condenser dials.
Discusses expected signal reception range and what to do if the set doesn't work.
To Next Page
General