Crosley CR3012A User Manual

Getting Started
Unpacking
1. Remove packing materials from unit.
Note: Save all packing materials.
2. Remove plastic bags covering main unit and speakers.
3. Remove ties from AC power adaptor.
4. Remove plastic bag covering iPod/iPhone/iPad support.
5. Locate remote control in foam packing and remove remote.
Set Up
1. Unwind the cord on the AC power adaptor.
2. Plug AC end of the power cord into the appropriate
wall outlet.
3. Plug the small end of the power adaptor into
the Power Jack Input in the back of the unit.
4. Place the speakers to the right and left of the main unit.
Note: The speakers are noted as Right and Left on the back of
the man unit.
5. Place the iPod/iPhone/iPad support on the top of the unit
and install thumb screw.
6. Position your iPod, iPhone or iPad on the dock and adjust
the support as necessary to provide a solid support.
Tighten the thumb screw to hold the support into place.
6
cr3012A_Manual.qxd:Layout 1 8/26/11 10:27 AM Page 7

Crosley CR3012A Specifications

General

Brand	Crosley
Model	CR3012A
Category	Stereo System
Language	English