The Crosley CR6034B Switch II Turntable is a versatile audio system designed for playing vinyl records, listening to radio, and streaming music via Bluetooth or auxiliary input. It comes with external speakers, providing a complete audio experience.
Function Description:
The primary function of the CR6034B is to play vinyl records at two different speeds: 33 1/3 RPM and 45 RPM. It features a tonearm with a cue lever for precise placement and lifting of the stylus, a pitch control knob for fine-tuning playback speed, and a hold-down clip to secure the tonearm when not in use. For playing 45 RPM records, a dedicated 45 RPM adapter is included.
Beyond vinyl playback, the unit offers an integrated AM/FM radio tuner. Users can select either AM or FM mode using the Function Switch and tune into desired stations with the Tuning Knob. The FM antenna is a wire antenna, and its position can be adjusted for optimal reception. The AM antenna is built internally, and rotating the unit may improve reception in areas with poor signal.
Bluetooth connectivity is another key feature, allowing users to wirelessly stream music from their audio devices. The Bluetooth indicator flashes blue when in pairing mode and turns solid blue once successfully paired. The Bluetooth version is 5.0, ensuring a stable and efficient connection.
For wired audio input, the turntable includes an Aux In Jack. This enables connection of external audio devices using a 3.5mm auxiliary cable, allowing music from these devices to be played through the turntable's speakers. A Headphone Jack is also provided for private listening.
The unit is powered by an AC power adaptor and features a Power/Volume Knob for turning the unit on/off and adjusting the volume. A Function Switch allows users to select between PHONO (turntable), FM, AM, Bluetooth, and Aux In modes.
Important Technical Specifications:
- Power: AC power adaptor, DC output 12V 2.5A
- Power Consumption: 29W
- Speaker: 4", 4 Ω, 15 W x 2 (external speakers)
- Turntable Speed: 33 1/3, 45 RPM
- Replacement Needle: Crosley NP15
- Bluetooth Version: 5.0
Usage Features:
- Initial Setup: The unit should be placed on a flat, stable, and vibration-free surface. The tonearm tie-wrap needs to be removed, and the slip mat placed on the platter. The external speakers are connected to the Speaker Output Terminals using the included speaker wire. The AC adaptor is then connected to the Power Jack. It's crucial to ensure all connections are correct before plugging the AC adaptor into a power outlet and turning on the unit.
- Turntable Operation: To play a record, turn on the power, set the Function Switch to PHONO, and select the appropriate speed (33 1/3 or 45 RPM) with the Speed Switch. Place the record on the platter, using the 45 RPM adapter if necessary. Remove the stylus protector and release the tonearm's Hold Down Clip. Use the Cue Lever to lift the tonearm, gently move it over the desired starting point on the record, and then lower the Cue Lever to begin playback. To stop, lift the tonearm with the Cue Lever, return it to the Tonearm Rest, and secure it with the Tonearm Clip.
- Pitch Control: The Pitch Control Knob allows for a +/- 10% adjustment of the turntable speed. Turning it clockwise increases the speed, while turning it counter-clockwise decreases it.
- Radio Operation: Select FM or AM with the Function Switch. Use the Tuning Knob to find radio stations. For FM, adjust the wire antenna for better reception. For AM, rotating the entire unit may help.
- Bluetooth Operation: Set the Function Switch to Bluetooth mode. The Bluetooth indicator will flash blue. On your audio device, search for "CROSLEY CR6034B" and pair. A confirmation sound and a solid blue indicator light will signal a successful connection, allowing music streaming.
- Aux Input Connection: Rotate the Function Knob to Aux In mode. Connect your audio device to the Aux In Jack using a 3.5mm auxiliary cable to play music through the turntable's speakers.
- Energy Saving: To comply with ERP energy-saving standards, the unit may automatically cut off power if there is no audio input for 20 minutes. To resume playing, the power needs to be turned off and then on again.
Maintenance Features:
- Stylus Care: Avoid touching the stylus tip with fingers and bumping it against the turntable mat or record edges. Clean the stylus frequently with a soft brush, moving from back to front only. When moving or cleaning the turntable, ensure the stylus guard is in place to prevent damage.
- Record Cleaning: Clean records with a record cleaning brush and solution to remove dust or grease.
- Unit Cleaning: The turntable lid and cabinet can be cleaned with a slightly damped microfiber cloth. Avoid using cleansers containing alcohol, benzene, or other harsh chemicals, as these can damage the paint and finish. Crosley offers a range of cleaning accessories, which can be found on their website.
- Needle Replacement: To remove the needle, gently hold both sides and pull it forward. To install a new needle, position it with the tip facing down, align the back with the cartridge, and push it into place. The replacement needle model is Crosley NP15.
Troubleshooting:
The manual provides guidance for common issues:
- No Power: Check if the power adaptor is correctly connected and if there is power at the outlet. Remember the ERP energy-saving feature might have turned off the unit if inactive.
- Platter Not Turning (Power On): Ensure turntable mode is selected and check if the turntable's drive belt has slipped off.
- No Sound / Low Sound (Platter Spinning): Verify that the stylus protector is removed, the tonearm is lowered by the cue lever, and no headphones are plugged in.
Need help?
To Next Page
General
