Crosley ELECTRIC RANGE - Initiating and Monitoring Self-Clean Cycle

22
1. Be sure the oven is empty, all oven racks are removed,
all items are cleared from cooktop and the over door is
completely closed. Be sure the clock displays the correct
time of day.
2. Press Start time. The “:” in the time of day will flash.
3. Press and hold the pad to scroll to the time to start a
delayed self-clean cycle. Release the key pad when the
desired time displays.
4. Press Clean. “---” appears in the display.
5. Press the or pad once. “3:00” will appear in the
display indicating that a 3 hour self-clean time is set. To
change to a 2 hour self-clean time press once (2:00
appears in the display).
(Some models) For a 4 hour self-clean time press
until (4:00 appears in display).
6. “CLn” will appear in the display during the self-clean
cycle and the “Door Locked” indicator light will glow until
the self-cleaning cycle is complete or cancelled and the
oven temperature has cooled.
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a self-
cleaning cycle once it has been activated:
1. Press Clear/Off.
2. Once the oven has cooled down for about 1 HOUR and
the “Door Locked” indicator light has turned off, the oven
door can be opened.
3. Restart the self-clean cycle once all conditions have been
corrected.
Setting a self-clean cycle or a delayed
start self-clean cycle
Setting a self-clean cycle
SELF-CLEANING
NOTE
As soon as the controls are set, the motor driven lock
will begin to close automatically and the “Door Locked”
indicator light will flash. DO NOT open the oven door
while the light is flashing (allow about 15 seconds for the
oven door to lock).
Whenever the self-clean feature is active you may check
the amount of time remaining in the self-clean cycle by
pressing the Clean pad. Remember the range door
cannot be opened until the range has cooled sufficiently.
You will need to add about 1 hour to the time
displayed before you can use the range for cooking.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
NOTES
To avoid possible burns use care when opening the oven
door after the self-cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or
steam to escape.
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution and avoid
possible burns when opening the door after the self-
cleaning cycle has completed. The oven may still be
VERY HOT.
CAUTION
To start a self-clean cycle immediately without a delay,
skip steps 2 & 3 in the instructions provided below.
IMPORTANT
When the self-clean cycle has completed:
1. The time of day will appear in the display window and
the “Clean” and “Door Locked” indicator lights will
continue to glow.
2. Once the oven has cooled down for about 1 HOUR and
the “Door Locked” indicator light has turned off, the
oven door can be opened.