EasyManua.ls Logo

Cross Technologies 450R - Troubleshooting Display and Alarm Errors

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
450 Operation Manual Rev A Page 21 8/26/99
PROBLEM/SYMPTOM POSSIBLE CAUSE
LCD display shows: A checksum error was found
after reading the non-
NV Memory Error volatile memory device.
The unit may still be used
(press the Program/Execute
switch to proceed) but
should be returned for
repair as soon as convenient
since a power interruption
may cause loss of the unit's
programmed settings.
Receiver LCD display Receiver may be set to an
indicates a CXR alarm. incorrect frequency, or the
transmit site may not be
operating on the specified
frequency.
Receiver SQUELCH adjustment
may need to be changed.
(See Section 4-7)
The subcarrier transmitter
for the specified frequency
may not be operating, or may
be at a reduced carrier
level.
Receiver LCD display Any of the situations de-
indicates an AFC alarm. scribed above for a CXR
alarm may, under some con-
ditions, also cause an AFC
alarm.
The receiver may be tuned to
a wide deviation channel
which it is unable to track.