1. Take out the Buds from the charging case.
2. The earbuds will auto Power On and earbud will enter into the
pairing mode
3. Search for 'CB-Arc Buds' in your Phone's Bluetooth list
4. Click on 'CB-Arc Buds' to pair.
1. For Mono mode, take out either of the earbuds that’s already
paired.
2. The music will automatically play in that particular Arc bud
Multiple connection
To use multiple connection mode, pair the Arc buds with your first
device (phone or laptop). Then, connect the Arc buds to your
second device (phone or laptop). The Arc buds will automatically
switch to the active audio source. For example, if you're playing
music on your laptop and receive a call on your phone, the Arc
buds will switch to the phone.
Reset
method-1 - open the Bluetooth settings on Phone and click on
Arc-Buds and select unpair, this will delete the Arc buds profile
on the phone and the buds will enter into the pairing mode.
1.
method 2 - disconnect the Arc-Buds from the phone then tap
five times on the either side of the buds, Blue light flashes for 3
seconds with prompt factory reset sucessful, this indicates the
reset of the arc buds.
2.
3
First time pairing
To Next Page
Loading...
