EasyManua.ls Logo

Crosscall X-WAVE - Safety Measures

Crosscall X-WAVE
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY MEASURES
Carefully follow the steps described in the quick start
guide to ensure your safety.
• Use with the correct charger.
• Do not dispose of your device in a fire.
• Do not burn your device.
• Do not expose your device to temperatures greater
than 60°C/140°F.
• Recycle according to current standards.
• Ensure you always close the sealing cap properly.
• The hook is for attaching the speaker. Under no
circumstances must it be used for other purposes. Do
not use the hook for climbing.
• The tubular stand must not be submersed in water.
• Allow the speaker to dry in the open air.
• The small parts (screw, screwdriver, hook, etc.) can be
a choking risk.
• Always store this device between 15 and 25 degrees
to maximize its life.
• Do not expose to dust, direct sunlight, high humidity,
heat or any mechanical impacts.
• Avoid impacts.
• If the device overheats, falls or has been damaged, please
stop using it immediately.
• Do not allow your children or pets to chew or lick the
device.
• Do not use aggressive cleaning agents or solvents such
as petrol or alcohol to wash your product: risk of damage.
• Be careful with the edges, uneven surfaces and metal
parts of this device, as well as its packaging to avoid any
possible injury or damage.
• Do not modify, repair or disassemble your device. Doing
so may result in fire, electric shock, or complete destruction
of the speaker. None of this is covered by the warranty.
• Do not attempt to change a part by yourself; if a part
needs to be changed, contact your dealer.
• Do not remove the silicone coating of the speaker, it
ensures its watertightness.
• This device is not intended for use by persons (including
children) with reduced physical, sensory or mental