Crossfire C5 Series - Specs and Dimensions; Load

SPECS AND DIMENSIONS
LOAD
Please be aware of the minimum impedance you may apply to your particular model amplier. See chart below for more infor-
mation. Any lower impedance than the minimum can send the amplier into current protection or possibly damage the circuitry.
To prevent damage, use the following formulas to help you gure out the load you are placing on your amplier. If you have any
difculties, please contact your local Crossre dealer or Crossre’s Technical Assistance at tech@crossrecaraudio.com
Model:
c5 402 c5 462 c5 522 c5 652
2 Way
4” / 102mm
N/A
.75” / 19mm
4 Ohm
40 Watts
80 Watts
88
100 - 20k
3.7” / 94mm
2” / 52mm
.35” / 9mm
NO
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl
2 Way
4”x6” / 102x152mm
N/A
.75” / 19mm
4 Ohm
40 Watts
80 Watts
88
100 - 20k
3.7” x 5.7“ / 91 x 144mm
2.1” / 55mm
.35” / 9mm
NO
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl
2 Way
5.25” / 133mm
N/A
.75” / 19mm
4 Ohm
60 Watts
120 Watts
88
80 - 20k
4.6” / 116mm
2.2” / 56mm
.35” / 9mm
YES
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl
2 Way
6.5” / 165mm
N/A
.75” / 19mm
4 Ohm
75 Watts
150 Watts
90
60 - 20k
5.7” / 145mm
2.4” / 61mm
.2” / 5mm
YES
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl