EasyManua.ls Logo

Crossfire VR2000D - User Manual

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Master 0:
Master 180:
Slave:
MODEL:
VR142 VR202 VR302 VR402 VR602 VR1202 VR354 VR404
VR804 VR401 VR300D VR600D
VR1000D VR2000D VR705D
POWER/4 ohm 35 x 2 50 x 2 75 x 2
100 x 2
150 x 2 300 x 2 35 x 4 50 x 4 100 x 4 200 x 1 150 x 1
150 x 1
250 x 1 1000 x 1 50 x 4/150 x 1
POWER/2 ohm 70 x 2 100 x 2 150 x 2 200 x 2 300 x 2 600 x 2
70 x 4
100 x 4 200 x 4 400 x 1
300 x 1 300 x 1 500 x 1 2000 x 1 100 x 4/300 x 1
POWER/1 ohm N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A N/A 600 x 1 1000 x 1 N/A
N/A
BRIDGED/4 ohm 140 x 1
200 x 2 300 x 2 400 x 1 600 x 1 1200 x 1
140 x 2 200 x 2
400 x 2 N/A N/A N/A N/A N/A 200 x 2/150 x 1
T.H.D 0.02%
0.02%
0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02% 0.02%
*** *** *** *** 0.02%
Bandwidth + 3dB
5-38KHz
5-38KHz 5-38KHz 5-38KHz
5-38KHz 5-38KHz 5-38KHz 5-38KHz
5-38KHz 5-38KHz
5-250Hz 5-250Hz
5-250Hz 5-250Hz 5-38KHz/5-250Hz
Signal To Noise >93dB
>95dB >97dB >97dB >100dB >100dB
>95dB >95dB
>95dB >94dB
>90dB >90dB >90dB >90dB >95dB
Damping Factor >150 >200 >200
>200 >300 >200 >150 >150 >150 >310 >200 >200 >200
>200 >250
Separation 60dB 60dB 62dB 62dB 68dB 68dB 61dB
61dB 61dB
N/A N/A N/A N/A N/A 60dB
Input Sensitivity * *
* * * *
* *
* * * * * * *
Input Impedance 20Kohm 20Kohm 20Kohm
20Kohm
20Kohm 20Kohm 20Kohm 20Kohm 20Kohm 20Kohm 20Kohm
20K
ohm 20Kohm 20Kohm 20Kohm
Power Fuse 20 A 25 A 30 A (2)25 A (2)30 A N/A
25 A
(2)20 A N/A
(2)25 A N/A N/A N/A N/A N/A
Dimensions W: 9.3 IN 9.3 IN
9.3 IN 9.3 IN 9.3 IN 9.3 IN 9.3 IN 9.3 IN 9.3 IN 9.3 IN 9.3 IN
9.3 IN 9.3 IN
9.3 IN 9.3 IN
H: 2.1 IN
2.1 IN 2.1 IN
2.1 IN 2.1 IN 2.1 IN 2.1 IN
2.1 IN 2.1IN
2.1 IN 2.1 IN 2.1 IN 2.1 IN 2.1 IN 2.1 IN
L: 8.5 IN
10.5 IN
11.5 IN 13 IN 15 IN 22 IN 12 IN 14 IN 17.6 IN 13 IN
9.5 IN 11.5 IN 14 IN 22 IN
19 IN
CROSSOVER:
Selectable ON/OFF crosso
ver-fully variable 5
0-150Hz HP (High Pass)/LP (Low Pass) or for those models with "NO" high lev
el inputs is
variable 50-500Hz HP/LP
Var. HP/LP
50-150Hz
50-150Hz 50-150Hz 50-150Hz 50-150Hz 50-150Hz
50-150Hz 50-150Hz
50-150Hz 50-150Hz
50-250Hz 50-250Hz 50-250Hz
50-250Hz 50-250Hz
Var. High Pass
50-500Hz 50-500Hz 50-500Hz
50-500Hz 50-500Hz 50-500Hz 50-500Hz
50-500Hz 50-500Hz
50-500Hz
N/A N/A N/A N/A
50-250Hz
X-O
ver Slope 12dB 12dB
12dB 12dB 12dB 12dB 12dB 12 dB 12dB 12dB 12dB 12dB 12dB 12dB
12dB
45hz BOOST YES
YES YES YES
YES NO NO NO NO NO NO NO
NO NO NO
Sub-Sonic Filter NO
NO NO NO NO NO NO
NO NO
NO 20-50Hz 20-50Hz 20-50Hz 20-50Hz 20-50Hz
High Level Input
YES* YES* YES* NO NO NO
YES* YES* YES* YES* YES*
NO NO
NO NO
Pass-Thru Output
NO NO NO NO NO NO NO
NO NO
YES YES YES YES YES NO
***
T.H.D. levels vary depending o
n impedance load. Please see chart below for more information. All
specifications are with 12.5 volts DC.
Typical output with 14.4
volts DC is approximately 20% higher.
T.H.D. LEVEL @ 4 OHM
@.08% @.08% @.08% @.08%
T.H.D. LEVEL @ 2 OHM
@.40% @.40% @.40% @.40%
T.H.D. LEVEL @ 1 OHM
N/A
@1% @1% N/A
* In an
effort to maintain the be
st quality and functioning product on the market co
ntinuous changes such
as the following are made as a "Running
Change" improvent. In some model amplifiers the
"HIGH LEVEL" input was replaced wi
th an "INPUT SENSITI
VITY MULTIPLIER". This two position swit
ch
allows the amplifier to make full po
wer at a wider range of voltage input with
out the use of a li
ne driver or sacrifice of sound quality. The following chart
explains the variations entitled to such changes.
INPUT SENSIT
IVITY MEASUREMENTS
X1 INPUT
150mV-3.2V
150mV-3.2V 150mV-3.2V
150mV-3.2V 150mV-3.2V
150mV-3.2V 150mV-3.2V 150mV-3.2V
150mV-3.2V 150mV-3.2V
240mV-6V 240mV-6V
240mV-6V 240mV-6V
X3 INPUT
450mV-9V
450mV-9V 450mV-9V
450mV-9V
450mV-9V 450mV-9V
450mV-9V
450mV-9V
450mV-9V
450mV-9V
NA
NA NA NA NA
Class "D" Technology
Military Spec Audiophile Gr
ade Components
High Efficiency PWM Power Supply
-Multi-stranded power
torroid
-Oversized torroidial core
MOSFET Input and
Output Transistors
Oversized Capacitor Banks
Discrete Mount Power and Speaker Terminals
Variable Lowpass Electronic Crossover
Variable Subsonic Filter
RCA Preamp Output
-Variable HP/LP/Full crossover
Built in Bridging Module (60
0D,1000D)
-Master / Slave Selector
-0/180 Phase Selector
5 Way Protection Cir
cuitry
Soft Remote On/Off Circuitry
Remote Subwoofer Level Control
Class "AB" Technology
Fully 2 Ohm Stable Stereo Operation
Military Spec. Audiophile Grade Components
High Efficiency MOSFET Power Supplies
-Multi-stranded power torroid
Efficient Bipolar Output Transistors
Oversized Capacitor Bank
Wire Free PC Board Layouts
Nickel Plated Input an
d Output Connectors
Variable Highpass and Lowpass Electronic Crossover
s
Simultaneous Mono/Stereo Operation Capability
Internally Bridgeable
5 Way Protection Circuitry
Soft Start, On/Off Circuitry
High Level Inputs
VR142 VR202 VR302 VR402 VR602
VR1202 VR354 VR404 VR804 VR401
VR300D VR600D VR1000D VR2000D
FEATURES
FEATURES
SPECIFICATIONS
SPECIFICATIONS
For the VR705D amplifier please refer to the Class AB technology for channels 1-4 and Class D technology for the 5th channel.
150mV-3.2V
240Mv-6V
IMPORTANT
Please read all instructions before installation!
MOUNTING
Tab Installation Input Sensitivity
L R
LOW IN
R
50Hz 150Hz
HIGH IN
CONNECTI
NG
THE
W
I
RES
S
P
E
A
K
E
R
O
U
T
P
U
T
W
I
R
I
N
G
D
I
A
G
R
A
M
S
W
I
R
I
N
G
D
I
A
G
R
A
M
S
C
O
N
T
I
N
U
E
D
PREAMP FEA
TURES
S
IGN
A
L INPUT
S
VR AMPLIFIERS
VR AMPLIFIERS
VR Series
Question and Answer IconNeed help?

Do you have a question about the Crossfire VR2000D and is the answer not in the manual?

Summary

Amplifier Specifications and Ratings

Power Output and Performance Metrics

Detailed power ratings, bandwidth, S/N, and damping factor for models.

Input, Crossover, and Dimensions Data

Specs for input sensitivity, impedance, crossover, and physical size.

Amplifier Installation and Mounting

Pre-Installation Warnings and Precautions

Crucial instructions and precautions before installing the amplifier.

Optimal Amplifier Mounting Techniques

Guidelines for mounting to ensure proper heat dissipation and longevity.

Power, Ground, and Remote Connections

Wire Gauge and Fuse Selection for Power

Recommended wire gauges and fuse ratings for safe power delivery.

Speaker Output and Wiring Best Practices

Understanding Speaker Impedance Loads

Importance of matching speaker impedance to prevent amplifier damage.

Basic Amplifier Wiring Diagrams

Advanced Wiring Diagrams

Preamp Features and Control Settings

Signal Input and Level Adjustment

Amplifier Bridging and Master;Slave Setup

Strapping and Bridging Amplifiers

Instructions for connecting multiple amplifiers for increased power output.

Class D Amplifier Electrical Considerations

Electrical System Requirements for Class D

Essential electrical system support for Class D amplifiers.

Voltage, Alternator, and Battery Maintenance

Recommendations for battery, alternator, and voltage maintenance.

Summary

Amplifier Specifications and Ratings

Power Output and Performance Metrics

Detailed power ratings, bandwidth, S/N, and damping factor for models.

Input, Crossover, and Dimensions Data

Specs for input sensitivity, impedance, crossover, and physical size.

Amplifier Installation and Mounting

Pre-Installation Warnings and Precautions

Crucial instructions and precautions before installing the amplifier.

Optimal Amplifier Mounting Techniques

Guidelines for mounting to ensure proper heat dissipation and longevity.

Power, Ground, and Remote Connections

Wire Gauge and Fuse Selection for Power

Recommended wire gauges and fuse ratings for safe power delivery.

Speaker Output and Wiring Best Practices

Understanding Speaker Impedance Loads

Importance of matching speaker impedance to prevent amplifier damage.

Basic Amplifier Wiring Diagrams

Advanced Wiring Diagrams

Preamp Features and Control Settings

Signal Input and Level Adjustment

Amplifier Bridging and Master;Slave Setup

Strapping and Bridging Amplifiers

Instructions for connecting multiple amplifiers for increased power output.

Class D Amplifier Electrical Considerations

Electrical System Requirements for Class D

Essential electrical system support for Class D amplifiers.

Voltage, Alternator, and Battery Maintenance

Recommendations for battery, alternator, and voltage maintenance.

Crossfire VR2000D Specifications

General IconGeneral
Channels1
Subsonic Filter10Hz - 50Hz
Operating Voltage9V - 16V
THD<1%
Bass Boost0 - 18dB

Related product manuals