– bed and breakfast type environments.
24. Do not use outdoors.
25. Save these instructions.
KNOW YOUR COFFEE MAKER
(Product may be subject to change without prior notice)
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as
follows:
1. Pour water into water tank, the water level should not exceed the “MAX” mark in the tank. Then replace
the water tank cover.
Note: the appliance is supplied with a detachable tank for easy cleaning, you can fill the tank with water
firstly, and then put the tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh). make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance as indicating of “INSERT” mark, and you
can fix them into coffee maker firmly through turn it anticlockwise until it is fully locked.
3. Place an espresso cup (yourself cup) on removable drip plate. Make sure the knob is on the position
which is the“ ”position.
Note: the appliance is not equipped with jug, please use yourself jug or coffee cup.
4. Connect to power source, press the ON/OFF switch. The power indicator (red) will be illuminated.
5. Turn the knob to the “ ” position, the pump will pump water, when there is water flowing out and
close the pump by turning knob again to the “ ” position, make sure the steam button is on the higher
position which is the “ ” position and waiting for a moment, the appliance begins to be pre-heated until
the ready indicator (blue) is illuminated, it shows the pre-heating is finish. Turn the knob to the “ ”
position again, and water will flow out.
To Next Page
Loading...
