Need help?Do you have a question about the Crown CT20102-20 and is the answer not in the manual?
Emphasizes reading and understanding all safety recommendations to prevent hazards.
Advises against operating the tool when impaired by fatigue, illness, or substances.
Instructs users to inspect the tool for damage and replace worn parts before operation.
Highlights the toxicity and flammability of gasoline.
Provides essential safety steps for handling and fueling the tool.
Stresses the need for ventilation and avoiding hazardous environments.
Mandates the use of PPE, including goggles, respirators, boots, and hard hats.
Instructs to switch off the engine before performing any maintenance.
Warns against using non-authorized parts or accessories.
Advises to stop the tool immediately if excessive vibration occurs.
Warns to keep body parts away from moving components.
Alerts users about hot engine and muffler parts.
Instructs to stop the engine immediately if an object is struck or the tool becomes entangled.
Prohibits operating the tool with loose or damaged parts.
Recommends servicing by qualified specialists only.
Provides guidelines for safe storage of the tool, especially regarding fuel.
Highlights severe consequences of not following petrol engine safety rules.
Recommends having first-aid and fire-fighting equipment readily available.
Informs about harmful substances emitted during operation and their health effects.
Stresses the need for adequate ventilation when refueling or operating the tool.
States that only trained and competent persons should operate the tool.
Strictly prohibits the use of the tool by children and teenagers.
Instructs to inspect and clear the worksite before starting operation.
Warns against modifying the tool or using it if defective.
Emphasizes using sharp, defect-free chains and checking tension and lubrication.
Reiterates the importance of using appropriate PPE and attire.
Prohibits the presence of people or animals in the work area.
Advises to wait for the saw chain to reach full speed before starting to saw.
Guides on maintaining a stable position and holding the tool firmly with both hands.
Instructs to turn off the tool immediately if the saw chain gets blocked.
Warns about the risk of recoil and provides precautions.
Reiterates the need for a firm grip with both hands.
Emphasizes using a properly maintained saw chain.
Warns against using the tip of the cutting unit for sawing.
Specifies that the tool must be fully stopped before removal.
Emphasizes switching off the tool before any procedures.
Details the process of assembling/disassembling the cutting unit and tensioning the saw chain.
Explains how to check and adjust the saw chain tension.
Details how to check if the chain lubrication system is functioning correctly.
Explains the procedure for checking the functionality of the saw chain brake.
Emphasizes reading and understanding all safety recommendations to prevent hazards.
Advises against operating the tool when impaired by fatigue, illness, or substances.
Instructs users to inspect the tool for damage and replace worn parts before operation.
Highlights the toxicity and flammability of gasoline.
Provides essential safety steps for handling and fueling the tool.
Stresses the need for ventilation and avoiding hazardous environments.
Mandates the use of PPE, including goggles, respirators, boots, and hard hats.
Instructs to switch off the engine before performing any maintenance.
Warns against using non-authorized parts or accessories.
Advises to stop the tool immediately if excessive vibration occurs.
Warns to keep body parts away from moving components.
Alerts users about hot engine and muffler parts.
Instructs to stop the engine immediately if an object is struck or the tool becomes entangled.
Prohibits operating the tool with loose or damaged parts.
Recommends servicing by qualified specialists only.
Provides guidelines for safe storage of the tool, especially regarding fuel.
Highlights severe consequences of not following petrol engine safety rules.
Recommends having first-aid and fire-fighting equipment readily available.
Informs about harmful substances emitted during operation and their health effects.
Stresses the need for adequate ventilation when refueling or operating the tool.
States that only trained and competent persons should operate the tool.
Strictly prohibits the use of the tool by children and teenagers.
Instructs to inspect and clear the worksite before starting operation.
Warns against modifying the tool or using it if defective.
Emphasizes using sharp, defect-free chains and checking tension and lubrication.
Reiterates the importance of using appropriate PPE and attire.
Prohibits the presence of people or animals in the work area.
Advises to wait for the saw chain to reach full speed before starting to saw.
Guides on maintaining a stable position and holding the tool firmly with both hands.
Instructs to turn off the tool immediately if the saw chain gets blocked.
Warns about the risk of recoil and provides precautions.
Reiterates the need for a firm grip with both hands.
Emphasizes using a properly maintained saw chain.
Warns against using the tip of the cutting unit for sawing.
Specifies that the tool must be fully stopped before removal.
Emphasizes switching off the tool before any procedures.
Details the process of assembling/disassembling the cutting unit and tensioning the saw chain.
Explains how to check and adjust the saw chain tension.
Details how to check if the chain lubrication system is functioning correctly.
Explains the procedure for checking the functionality of the saw chain brake.
To Next Page
General