14
English
Noise information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of conformity
We declare under our sole responsibility that the
product described under "Power tool specications"
is in conformity with all relevant provisions of the
directives 2006/42/EC including their amendments
and complies with the following standards:
EN 62841-1:2015,
EN 62841-2-2:2014,
EN 55014-1:2017+A11:2020,
EN 55014-2:2015�
Certication Wu Cunzhen
manager
Merit Link International AG
Stabio, Switzerland, 27�07�2021
WARNING - To reduce the risk of injury,
user must read instruction manual!
General safety rules
WARNING! Read all safety warnings, in-
structions, illustrations and specications
provided with this power tool. Failure to fol-
low the warnings and instructions may result in
electric shock, re and / or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool�
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents�
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of ammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes�
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to lose
control�
Power tool specication
Cordless screwdriver CT22033
Power tool code see page 7
Rated voltage [V] 3,6
No-load speed [min
-1
] 290
Battery type Li-Ion
Battery charging time [min] 180-360
Battery capacity [Ah] 2
Torque range [Nm] 6,6-7,2
Number of stages of rotation torque 4
Tool holder type
[mm]
[inches]
6,35
1/4"
Max. screw diameter
[mm]
[inches]
5
13/64"
Weight
[kg]
[lb]
0,29
0�64
Sound pressure [dB(A)] —
Acoustic power [dB(A)] —
Weighted vibration [m/s
2
] —
To Next Page
Loading...