23
English
• Do not put the end of the suction hose (when the
appliance is on) close to body, eyes or ears - this may
cause injuries�
• Use only clean water, when in the triple outlet air
cleaning mode (water lter). Use of any other liquids is
strictly prohibited�
• Do not use the air hose for the purposes other than
those for which it was intended� Never use the air hose
to carry the appliance or to drag it� Protect the air hose
from heating, sharp edges and moving parts of other
power tools or appliances�
• Picking up some substances may cause building
of static charge on the parts of the vacuum cleaner�
Take due care - static charge may cause sense of
discomfort, loss of balance and falling�
• When working in air blowing mode make sure that
the air hose is clean� Clean the hose if necessary�
• When working in air blowing mode small objects
may be thrown out at high speed with the airow.
These objects may injure the person operating the
appliance or surrounding persons� Use personal
protective equipment (safety glasses and mask) and
equip the workplace properly�
• Take special care while working on stairs�
Symbols used in the manual
Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol Meaning
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Symbol Meaning
Movement direction�
Rotation direction�
Locked�
Unlocked�
I / IPX4 Safety class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Do not dispose of the power
tool in a domestic waste
container�
Power tool designation
All-purpose vacuum cleaners provide the suction
of non-harmful dust, small particles and suction of
non-ammable liquids also. They are suitable for
connection to power tools that produce cuttings, swarf
and dust during operation�
Power tool components
1 Suction power regulator
2 Air discharge outlet
3 On / off switch
4 Socket
5 Ventilation slots
6 Hose connector (lower)
7 Base
8 Lock
9 Front wheel *
10 Transport handle
To Next Page
Loading...
