Crown OC-150A - Technical Specifications

METER RESPONSE
+Ql -14 db fram 20 Hz ts 20 KHz; En peak
mde eapabte of measuring (within 5%) a
single cycle at TOKHz,
METER ACCURACY
?5% adaf full scale, all ranges.
GROUNDING
HEADPHONE JACKS
Adjustable at front panel; miniurn hsld
approximately 600 mi9liseconds; maximum
hold essentially permanent while OC-15OA
is turned on - driR in maximum hold
(limited by device tolerances) sf less
than f 8,5 db over 20 minutes,
LEB aawd right speaker as?d amplifier
grounds isalat@d, so that amplifiers with
for witfP~k~"g isolated channel ground%
may be used safely,
Rear panel swikkes a!!ow 3 levels of
attenuation of amplifier signal apgDied
to headphones; 8 db, -17 db, and -24 db,
SEMICONDUCTOR COMPLEMENT
Four sp-amps i~ quad IC packages; 2 BI-FET
ap-amps as meter drivers; 12 signal dides;
2 Zener diodes; 12 bipslar transistors,
AC OUTLETS
Four, kenswitched. Total current capability, 15A.
POWER REQUIREMENTS
1261240 VAC, 40-400 HZ,
5gfl Hx 17'" x 8%'"ehind panel,
10 Ibs.; with Girate-nut enclasure, 19 Ibs.