To Next PageTo Next Page
Need help?Do you have a question about the Crown PTH50 Series and is the answer not in the manual?
Remove packing material and inspect the truck for shipping damage. File a claim if damage is found.
Simple raise/neutral/lower method for Crown PTH50 Series pallet trucks.
Push lever down to RAISE, pump handle until full height. Hydraulic bypass minimizes stress.
Move lever to NEUTRAL to release handle from pumping effort before maneuvering.
Pull lever up to the LOWER position to lower the forks.
Safe operation prevents injury, protects colleagues, and preserves equipment and materials.
Reduce injury risk by following safety instructions and obeying warnings and labels.
Only operate the truck if you are trained and authorized.
Read and obey all warnings and instructions in the manual and on truck labels.
Ensure the truck is in good working order before use.
Do not use truck as a scooter or allow riders.
Keep body parts away from load, lift linkage, and forks. Never go under elevated loads.
Use neutral position when maneuvering loads to reduce operator fatigue.
Maintain safe distance from edges of ramps, dock boards, and docks.
Be aware of dock board movement and potential falls from docks, which can cause serious injury or death.
Handle only safe loads.
Do not overload the truck or yourself; make multiple trips if necessary to save time and prevent injury.
Position forks evenly under the load for safer movement and easier positioning.
Do not pick up a load using only one fork.
Avoid moving loads on grades/ramps. For emergencies, lower load rapidly to stop.
Ensure ramps, elevators, and dock boards have sufficient capacity for your load and yourself.
Pull loads for long distances; it improves visibility and steering.
Watch for overhead obstructions when handling tall loads.
Park the truck safely on a level surface with the handle up and forks lowered.
Remove packing material and inspect the truck for shipping damage. File a claim if damage is found.
Simple raise/neutral/lower method for Crown PTH50 Series pallet trucks.
Push lever down to RAISE, pump handle until full height. Hydraulic bypass minimizes stress.
Move lever to NEUTRAL to release handle from pumping effort before maneuvering.
Pull lever up to the LOWER position to lower the forks.
Safe operation prevents injury, protects colleagues, and preserves equipment and materials.
Reduce injury risk by following safety instructions and obeying warnings and labels.
Only operate the truck if you are trained and authorized.
Read and obey all warnings and instructions in the manual and on truck labels.
Ensure the truck is in good working order before use.
Do not use truck as a scooter or allow riders.
Keep body parts away from load, lift linkage, and forks. Never go under elevated loads.
Use neutral position when maneuvering loads to reduce operator fatigue.
Maintain safe distance from edges of ramps, dock boards, and docks.
Be aware of dock board movement and potential falls from docks, which can cause serious injury or death.
Handle only safe loads.
Do not overload the truck or yourself; make multiple trips if necessary to save time and prevent injury.
Position forks evenly under the load for safer movement and easier positioning.
Do not pick up a load using only one fork.
Avoid moving loads on grades/ramps. For emergencies, lower load rapidly to stop.
Ensure ramps, elevators, and dock boards have sufficient capacity for your load and yourself.
Pull loads for long distances; it improves visibility and steering.
Watch for overhead obstructions when handling tall loads.
Park the truck safely on a level surface with the handle up and forks lowered.
General| Brand | Crown |
|---|---|
| Model | PTH50 Series |
| Category | Outdoor Cart |
| Language | English |
