It is possible to choose from a number of assist modes in the display settings menu. 100% of the
motor power output can be divided into 3, 5 or 9 assist modes.
The standard setting is 5 modes of motor assistance. 0 without motor assistance (display records
distance travelled)
Do not use assist mode 4 and 5 on a long or extremely steep climbs! Combination of heavy load
and low speed cause overheating of the motor which may lead to malfunction or damage of the
motor.
The e-bike can be used as a regular bicycle while the electric system is off.
Once you are done using the e-bike, it is important to turn off the electric system.
Operating the motor by using the PAS system:
There is a sensor that is located in the bottom bracket area. As the pedals are rotated, the sensor
recognizes the motion and turns on the motor. This model has 5 different speeds of PAS, which
can be controlled from the bicycle's display.
Definitions:
PAS - Pedal Assist Sensor - Sensor which is located near the bottom bracket axis, recognizes the
pedals movement and operates the motor accordingly.
To Next Page
