INTERFACING SOLUTIONS
CFD-03F
F-SERIES TAILGATE
HANDLE
W/ CAMERA
FORD
2004 - UP F-Series 150/250/350
PARTS INCLUDED
(1) Black Plastic Handle
(1) 18mm Bullet Camera
(1) 19ft RCA Video Cable
(1) Instruction Sheet
SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where
the device shows proof of being opened or improper extreme force.
TECH SERVICES
All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems
if you have technical questions, contact us directly: Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM) Pacic Time
www.cruxinterfacing.comRev. 040815 1
INSTALLATION OVERVIEW
YELLOW RCA /
VIDEO SIGNAL
F-SERIES T AILGA TE
HANDLE
CAMERA
LOCA TION
KEY CYLINDER
LOCA TION
CAMERA
INPUT
BLACK /
GROUND
RED /
TO REVERSE
BLACK BARREL /
CAM POWER
19FT
EXTENSION
SPECIFICATIONS:
CAMERA:
Sensor: CCD
Size: 18mm
Viewing Angle (H): 170°
Viewing Angle (V): 90°
TV System: NTSC / PAL
Guide Lines: Yes
Invert Image: No
Resolution: 480 TV Lines
Illumination: 0.4 Lux / F1.2
Power Supply: 12v
Waterproof: IP67
To Next Page
Need help?
General
